Видео

Thanks I appreciate that and you for watching the video. You’ll love their products and the results.

Thanks for your compliment and watching the video.

When it’s applied correctly you won’t have any issues with it peeling off, if you’re using a pressure washer give yourself enough distance when cleaning. At the end of this video I have a link that shows the car wash process.

I’ve done a few as well permanently painted them. The best route will be to remove the radiator cover located underneath the hood at the top, that way you can mask all that you don’t want painted.

I appreciate that, yeah I’ll be adding our logo to that area but I definitely thought about it.

You’re more than welcome and I’m glad you found use of the video. As for the side mirrors I have a video on how to remove them but not the chrome trim. I do have videos to show you how to spray wrap them black, it’s an easier way vs vinyl wrap and will benefit in other ways too. You won’t have to order new trim nor remove any parts, here’s both videos to help you with your project. ruclips.net/video/auvBuDHqCy4/видео.htmlsi=dtgiFZNfvQKTfDqo ruclips.net/video/REKRs_1ogqc/видео.htmlsi=iGyOxsOAgPYmQnle

You’re welcome and thank you for watching the video.

How’s it going, you know it

You’re welcome and thanks for watching the video, trust me when I say I can relate to your struggles 😆

Thanks and I appreciate you watching the video.

I suggest that you remove the handles so that you’re full wrapping around it vs only what’s visible. If you do decide to spray wrap the handle the possibility of it falling is high. Eventually after pulling on the handle the wrap will start to peeling in the direction of you pulling, there is a remedy for that if you’re skilled enough. After spraying the handles and letting them dry 3-4 hours you can cut and place a vinyl wrap strip behind them to avoid fingers pulling the spray wrap off.

You may have issues with your rotors or brakes If you’re still experiencing the scrubbing noise. I would start with the brakes before replacing the rotors.

No, I still have it

@@newtouchauto you wanna sell it? How much?

@@Didewro I’m not interested in selling it.

@@newtouchauto ok hit me up uo chg your mind. Thx

I’m not sure if you can get the connectors separately other than from the manufacturer. Your next option will be to add the electrical connections yourself, if you purchase a black & white roll of 12v wires they’ll operate the same. This video below shows how you can make it happen, let me know if you have any more questions about your project. ruclips.net/video/a-lacRrEYUU/видео.htmlsi=jqJzIO6jLNEwQsiV

That would defeat the purpose and benefit of this product, if you were applying permanent paint then it’ll be easier. Removing the emblems will result in removing the adhesive glue from behind them, you’d then have to reapply the correct adhesive tape so that the emblems flush properly. Basically save yourself the hassle of adding a step in the process that’s not needed.

@@newtouchauto and that my friend is why you are the Goat. Thank you

@Kolectivz 😆 thanks for watching the video and supporting the channel.

You’re welcome, I’ve yet to work on the vehicle mentioned.

That’s very odd, throughout my years dealing with vehicles I’ve never heard of a side mirror being electrically connected with the radio.

Thank you for responding! I was wondering if maybe you have any thoughts of what could be the cause? It flashes when I turn on my car and back up camera shows up on screen but that’s about it. I was thinking maybe the fuses? AC and all the buttons do work around it (my car is a 2019 Lexus ES 350 f sport) I just wanted your thoughts since I can tell you know what you’re doing, thank you!

@esmeraldaperez1488 You’re welcome, the issue that you’re having is definitely electrical. Check your fuse for the radio to be sure it’s the correct amp, sounds as if the radio is not getting enough voltage to power up fully. Also check the owners manual, there could be a note on resetting your radio. If all else fails I know where you can find the answer, there’s a forum for every vehicle that answers anyone experiencing an issue with their vehicle. If you google ”Lexus Forums” and search your vehicle and enter the question an answer will appear, trust that you’re not the first to have that issue. If you don’t find an answer, leave your question up and a Lexus expert will help you find out what it is.

You’re welcome and that’s gonna look tough when it’s done. Thanks for the compliment and watching the video.

Thanks for watching the video.

Thanks for the compliment and watching the video.

Thank you for the compliment and watching the video, the wrap can last 3-4 years. I recommend removing it at the 4 year mark so that it removes correctly, removing is not hard at all though. When using a heat gun it allows the wrap to release easier than without one.

You’re welcome and thank you for watching the video, it’s always good to hear that the video was of use.

You’re welcome, thank you for sharing your experience and watching the video. I’d suggest that you purchase the entire assembly, either way it goes you’ll have to remove the mirror and replace it. Save the time from breaking down the mirror portion which is a different process. Your local dealership or junkyard will be the closest hands on option, ordering a new replacement will be the last.

@@newtouchauto Thanks again for your valuable insights. Your video is great! You present it so well with such clear and easy to follow instructions. Down to the items that we'll need and how to carefully disassemble the inside door panel. I just subscribed and 'm going to start checking out your other videos now also.

I really appreciate your support and subscribing to the channel, you’ll find tons of videos that’ll help in many categories. Hope that you can get your side mirror replaced soon.

Depending on your rim size and style 1 primer and 1 color aerosol cans will be enough. 18” wheels and up will require more product, 2 primers and 2 color aerosol cans.

You’re welcome, thank you for sharing your thoughts and experience based off of this video.

You’re welcome and thank you for watching the video.

Dawn degreaser soap or any soap with degreaser, just be sure that you’re in a shaded area and not direct sunlight.

You’re welcome and thank you for watching the video.

Yeah these were kinda difficult to reinstall, you’ll have to adjust everything back the same way. The biggest issue was the latch which is probably why you’re experiencing the gaping. I had to readjust the front handles a few times to get them to seat correctly, the rear handles were easier to do. If you hook the latch properly it’ll flush correctly, I stuck a flathead screwdriver through the side hole to prop the latch and connected the handle that way.

Spray wrap could range from $3000-6000 Vinyl wrap could range from $5000-8000

You’re welcome and thanks for watching the video.

You’re welcome and thanks for watching the video

You’re welcome, thank you for sharing your thoughts and watching the video.

Thanks for sharing your thoughts and you are right about that, here’s more knowledge to go along with your comment. The materials from the brake pads protect and prevent the rotor from heating up, once the brake pads wear down to the metal you’ll experience the heat extracting from the wheel area. When you hear the brakes squealing dust corrosion will then be created to warn you that the brakes are failing. Overtime the metal to metal will continue to overheat and land onto your rims burning through the paint causing pitting issues that’ll leave you having to repair or replace your rims.

Thanks for the compliment and it’s best that you get rid of any loose paint or clear coat first hand. The correct way would be to use 400 grit first and 800 grit last, since I was wrapping the areas with vinyl it’s safe to begin and finish with 600 grit. My advice is to not sand down to the metal, try to keep as much paint for bonding purposes and whoever wants to paint the surface on a later date.

@@newtouchauto Thank you so much for the quick and detailed reply! Just one more follow up question, though. Are you wet sanding by hand to make sure you’re not removing paint, as you’ve previously mentioned?

Wet sanding is an option but no I didn’t go that route, I used a orbital sander. The grit you use will determine how much you want to sand off, anything 320 grit and under will cut through paint exposing metal.

@@newtouchauto Thank you again so much for the info, super helpful! I love watching your videos, super clean work!

@@idonttripmidgets No problem and thanks for the support, I really appreciate that

Have you ever noticed how the wheels are wider in the rear of a BMW, Mercedes or other sport cars? Well this gives you the image of a wider rim and tire vs the normal look as the front wheel.

I agree, thanks for watching the video and sharing your thoughts. The customer decided to proceed with the wrap and have the dents repaired on a later date.

@@newtouchauto peeped out your videos and you do a good job. Was thinking about getting my skylark wrapped probably. If you weren't 5 hours away I would stop by and get a quote. Closest wrap shop to me is in Tallahassee and it's not worth what they want.

I appreciate your compliment and yeah some wrap shop quotes can be on the expensive side. Hopefully you can get it wrapped soon at a decent price.

Thanks, I appreciate that

Thanks for watching the video, most of the H2 repairs are fairly simple. Hope that your repair is a success.

Thanks, the customer ordered the mirror from a local Chevy dealership. Calling around to junkyards is an option also, you should get it cheaper there.

You’re welcome and thank you for watching the video.

Thanks for the compliment and watching the video.

I actually ended up using a waterproof caulk sealer, you should be able to fill in any gaps with that.

A spray wrap could range from $1500-$4000 depending on the color.

@@newtouchauto should it just did that now my car looking all f up

@user-xm6oq9gz9u at least you can peel it off and return to the original color

Thanks for the compliment and sharing your thoughts. I appreciate you for watching the video

@@newtouchauto you have the highest reviews and in Lakeland. Def coming to you when I'm ready.

@@MourningWould I wasn’t aware, whenever you’re ready we can get you scheduled for that appointment.

This process is similar with a slight difference, once the door panel is removed the bolts are visible.

2 light primer, 2 medium primer, finish with 4 base color coats

@@newtouchauto appreciate the info..keep spraying 🫡

@@suspensefulness you’re welcome and thanks for watching the video.

No issues spraying product once it was cleaned, everything came out normal.

@@newtouchauto thanks for the reply and I didn’t want to cut the o ring until you responded and I at least can try spraying water as a test to see if it leaks through the trigger again

@E85_STI you’re and thanks for watching the video, once you apply the grease you should be fine to proceed. Test spraying with water is a great option to confirm.

Thanks for the compliment and sharing your thoughts. That’s exactly correct, the customer had a vision and we made it happen.